8010 - 2-Jaw Adjustable/Reversible Gear Puller - 7" Spark Plug Service 7/16 x 20 - 90o

7/16 x 20 - 90o GM/Chrysler

Turn the ignition key to the ON position

Locate the service valve on the fuel rail

Size: 10mm - 2-1/4" long x 1/2" drive

8010 - 2-Jaw Adjustable/Reversible Gear Puller - 7" Spark Plug Service 7/16 x 20 - 90oSpread: 7" (178mm) Reach: 5 1 2" (140mm) Screw Length: 7" (178mm) Capacity: 5 tons (4. 5MT) Instructions Hook the jaws to the desired gear, component, etc. being pulled removed. Jaws can be reversed to grab the gear, component, etc. from the outer or inner edge. Turn the thrust screw until it contacts the center shaft, apply pressure until the jaws are secure. Slowly turn the center screw until the desired component has been removed.