Specification for nickel-cobalt-chromium-molybdenum-aluminium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 14.8, Mo 5, Al 4.8, Ti 1.2) Ingestion-build-100998 the drawing of samples and

the drawing of samples and all the aspects that should be taken into account during normal

steel based doorsets

Manufacturers of electrical and optical connection and fibre optic couplers

BS 7591-4 describes the evaluation of porosity by liquid expulsion

Specification for nickel-cobalt-chromium-molybdenum-aluminium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 14.8, Mo 5, Al 4.8, Ti 1.2) Ingestion-build-100998 the drawing of samples and1 Scope This British Standard specifies requirements for nickel cobalt chromium molybdenum aluminium titanium heat resisting alloy supplied in the following forms, and as parts. a) Bars and extruded sections for machining: solution treated, designation HR 3A. b) Extruded sections for subsequent forming: softened, designation HR 3B. c) Billets and bars for forging: hot or cold worked and subsequently machined or ground, designation HR 3C. d) Forgings: