Gas Pressure Test Point 3/8" SAE M X 3/8" BSP M Brand_- Select Brand - Has many other applications with

Has many other applications with side fixing on one arm and front fixing on the other

This fitting is used to join 3 pipes at right angles

The roof cowl (outer section) sits on the roof

They are limited in location because they cannot pull water up unless they are primed with water already in the hose

Gas Pressure Test Point 3/8" SAE M X 3/8" BSP M Brand_- Select Brand - Has many other applications withThis test point is located immediately downstream from the regulator. It allows the user to easily test that gas is coming through the regulator and that it is at reduced pressure. Always test for leaks after any gas fittings are worked on BSP fittings require thread tape This may be used with Flared Nut ID 601 for 3 8in pipe, or ID 600 for 5 16in pipe Inlet is from regulator 3 8in Male BSP; Outlet is 3 8in SAE Male flare